Powder Painted PEI Flexi Plate
PEI Powder Painted
Powder Coated Flexi Plate
Powder Painted PEI Flexi Plate
Powder Painted PEI Flexi Plate
Powder Painted PEI Flexi Plate
Powder Painted PEI Flexi Plate
Powder Painted PEI Flexi Plate
Powder Painted PEI Flexi Plate
Powder Painted PEI Flexi Plate
Powder Painted PEI Flexi Plate
Powder Painted PEI Flexi Plate
Powder Painted PEI Flexi Plate
Powder Painted PEI Flexi Plate
Powder Painted PEI Flexi Plate
Powder Painted PEI Flexi Plate
Powder Painted PEI Flexi Plate

Powder Painted PEI Flexi Plate

Regular price
$23.00
Sale price
$23.00
Quantity must be 1 or more

We start with our original high chromium spring steel Flexi Plates, powder paint them with PEI, and bake them in a kiln. The PEI Powder Painted Flexi Sheets have a pronounced texture and give the bottom of your part a fantastic finish! The plates are coated on both sides, so you can save one side for pristine parts while you abuse the other side. Works perfectly with your Wham Bam magnetic base, not included. The Flexi Plate is 0.6mm thick. 

It behaves as most PEI sheets would and works great with PLA, TPU, PETG, ABS, as well as many other filaments. If you need more adhesion for tough-to-stick filaments like Nylon, feel free to use purple glue sticks or Magigoo, they will wash off with water after use.

To clean, use some isopropyl alcohol after each use to keep contaminants away. If you ever need to restore adhesion, use very fine sandpaper 600 or higher and pass lightly, then clean with alcohol. For PLA and PETG we recommend 70° C bed temperature.

*Attention: It is the buyer’s responsibility to be sure the size selected will work on your machine. Measure your bed, do not rely on build volume. Wham Bam is not responsible for mistaken order sizes.

**It is the buyer’s responsibility to pay any taxes and import duties. No refunds of uncollected customs packages.

Customer Reviews

Based on 108 reviews
93%
(100)
7%
(8)
0%
(0)
0%
(0)
0%
(0)
B
Bob
Best build surface I’ve used

I added the flexible build plate with PEX for my Ender farm and I’ll never use a different one. Models stick like glue and pop right off when done.

J
Justin Ellis
Great

Works phenomenally. Wish I hadn't jumped the gun on installing it before thinking about removing the old build plate and installing it directly on the heater bed. Didn't know/think that was an option until afterwards.

D
Dennis
Works really well for me with some small caveats

The plates are excellent surfaces to print on. I started with a small 180x180 Kingroon plate and when I saw the larger sizes were available I placed on order for them on the wham bam site. Some things to note:

1) My build area on my Voron is 300x300 but the build plate is actually larger, so the 300x300 one on the site is too small and also has the corners cut off (like a round section) so I just went ahead and am using it as it is for now.

2) I've already managed to scratch it with the nozzle while I fine-tune the z-offset automatic leveling script. It had some small issues and mis-calculated offsets caused the nozzle to contact the bed.

3) I tried to use the supplied steel wool but I don't remember getting any instructions for the plates, so I just put the plate in the sink and ran warm water & soap on it while scrubbing the scuffed and scratched areas with the steel wool. This seemed to help a lot but now those areas are more opaque than the rest of the build plate.

As I said, I like the surfaces and am using them exclusively now on my printers (from using glass before) but I'd like to know more about the purpose of the steel wool and how best to clean/repair the plates with it.

C
Chris Collins
Troodon 400

It works even though it does not fit the whole bed, Only if they made Flexi Plates for the Troodon 300 and 400. Good adhesion and performs well.

L
Lenders Benoit
Perfect item for my Ender 3 v2

Great delivery as annonced.
Very clean product!
Clean my previous PEX layer was the only one problem I had. The new PEX from my order was perfect and very easy to install.

Customer Reviews

Based on 108 reviews
93%
(100)
7%
(8)
0%
(0)
0%
(0)
0%
(0)
B
Bob
Best build surface I’ve used

I added the flexible build plate with PEX for my Ender farm and I’ll never use a different one. Models stick like glue and pop right off when done.

J
Justin Ellis
Great

Works phenomenally. Wish I hadn't jumped the gun on installing it before thinking about removing the old build plate and installing it directly on the heater bed. Didn't know/think that was an option until afterwards.

D
Dennis
Works really well for me with some small caveats

The plates are excellent surfaces to print on. I started with a small 180x180 Kingroon plate and when I saw the larger sizes were available I placed on order for them on the wham bam site. Some things to note:

1) My build area on my Voron is 300x300 but the build plate is actually larger, so the 300x300 one on the site is too small and also has the corners cut off (like a round section) so I just went ahead and am using it as it is for now.

2) I've already managed to scratch it with the nozzle while I fine-tune the z-offset automatic leveling script. It had some small issues and mis-calculated offsets caused the nozzle to contact the bed.

3) I tried to use the supplied steel wool but I don't remember getting any instructions for the plates, so I just put the plate in the sink and ran warm water & soap on it while scrubbing the scuffed and scratched areas with the steel wool. This seemed to help a lot but now those areas are more opaque than the rest of the build plate.

As I said, I like the surfaces and am using them exclusively now on my printers (from using glass before) but I'd like to know more about the purpose of the steel wool and how best to clean/repair the plates with it.

C
Chris Collins
Troodon 400

It works even though it does not fit the whole bed, Only if they made Flexi Plates for the Troodon 300 and 400. Good adhesion and performs well.

L
Lenders Benoit
Perfect item for my Ender 3 v2

Great delivery as annonced.
Very clean product!
Clean my previous PEX layer was the only one problem I had. The new PEX from my order was perfect and very easy to install.