Spring Clearance Sale, save 50% or more on select items. Plus buy 3, get one FREE!

140 x 84 - Elegoo Mars 2/Pro, Nova3D Bene 4, and Elfin 2 Mono SE
140 x 84 - Elegoo Mars 2/Pro, Nova3D Bene 4, and Elfin 2 Mono SE
140 x 84 - Elegoo Mars 2/Pro, Nova3D Bene 4, and Elfin 2 Mono SE
140 x 84 - Elegoo Mars 2/Pro, Nova3D Bene 4, and Elfin 2 Mono SE
140 x 84 - Elegoo Mars 2/Pro, Nova3D Bene 4, and Elfin 2 Mono SE
140 x 84 - Elegoo Mars 2/Pro, Nova3D Bene 4, and Elfin 2 Mono SE

140 x 84 - Elegoo Mars 2/Pro, Nova3D Bene 4, and Elfin 2 Mono SE

Regular price
$50.00
Sale price
$50.00
Quantity must be 1 or more

fits: Elegoo Mars 2 Pro, Elegoo Mars 2 (Green Lid), Nova3D Bene 4, and Nova3D Elfin 2 Mono SE

Size: 140 x 84 mm

Continuous printing with a Double Wham, start another print before you start cleaning the first! The Double Wham contains:

  • 1  WB Magnetic Base with 3M adhesive resistant to harsh solvents and chemicals like resist resin, mean green, and isopropyl alcohol
  • 2  WB Flexi Build Plate (spring steel) with a custom etched texture on both sides
  • 1  Piece of Sandpaper

The Flexible Build System contains:

  • 1  WB Magnetic Base with 3M adhesive resistant to harsh solvents and chemicals like resist resin, mean green, and isopropyl alcohol
  • 1  WB Flexi Build Plate (spring steel) with a custom etched texture on both sides
  • 1  Piece of Sandpaper

For more information on this product, click here: Flexible Build System for Resin

*Attention: It is the buyer’s responsibility to be sure the size selected will work on your machine. Measure your bed, do not rely on build volume. Wham Bam is not responsible for mistaken order sizes

**It is the buyer’s responsibility to pay any taxes and import duties. No refunds of uncollected customs packages.

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
L
Larry Fortna
Excellent Product

So much easier removing prints with this. Love It!

A
Adam Forbes
Gotta be a little careful but love it.

Before I get into it, I absolutely love the product. I got the package with two of the magnetic sheets.
If you want to print easier and faster than this is a fantastic product.
Pros: - speeds up printing (with the 2 pack you can pop one off and replace it and start another print while you clean the removable bed and clean the minis)
- speeds up print removal. You don't have to worry about removing the whole build plate, just the removable piece, and flexing it makes it so you no longer need to spend any effort trying to scrape off your minis.
Cons: -it uses an adhesive sheet from 3M which requires 3 days to fully adhere. Realistically this doesn't matter much unless for whatever reason you can't take 3 days off. The time you'll save yourself in the long run is super worth it though.
- you need to be careful which was the tab is facing. On the Mars pro 2 there is more room between the build plate and the resiviour on the back side of the printer, so you need to have the tabs facing towards the back or you can scratch the resiviour.
- I'm not sure if this is a printer issue or an issue with chitubox, but essentially the printer for whatever reason is set to go to the home location, and then move to Z zero, this essentially means when you're leveling the printer you want to use the sheet of paper hit home and tighten it and level it right there. Long story short if you try to raise the arm up a little and set that to z=0 to relieve some pressure on the spring it will fail to print. It tries to go to home first and will wind up slamming the print surface into the screen, be unable to actually get to home and the print won't start.
This isn't the products fault and is instead a problem with the printer software.
Basically you set the height that you want to be the base height and your printer for some reason says okay, we'll go to z=0 to start the print but first let me go to home which at this point is z=-5 or something. Slams the print surface into the base. The motor continues to try to reach z=-5 even when pressing into the screen and being unable to move. If left too long I imagine this will burn up the motors in the printer.

J
Joe H
Game Changer

So far the Wham Bam flex plate I bought for use in my Mars 2 Pro has been an absolute game changer. It's so much faster and safer than the standard build plate. Easier to clean too. Should I upgrade to a larger printer, I'll be ordering a matching Wham Bam at the same time.

A
Alexander Takajian
Best first purchase for and sla printer

If your new to sla printer or a veteran, getting a flexplate is easily the best upgrade for your printer. Prints easily, and I mean easily, comes off your build plate with a simple flex. Great job with this product.

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
L
Larry Fortna
Excellent Product

So much easier removing prints with this. Love It!

A
Adam Forbes
Gotta be a little careful but love it.

Before I get into it, I absolutely love the product. I got the package with two of the magnetic sheets.
If you want to print easier and faster than this is a fantastic product.
Pros: - speeds up printing (with the 2 pack you can pop one off and replace it and start another print while you clean the removable bed and clean the minis)
- speeds up print removal. You don't have to worry about removing the whole build plate, just the removable piece, and flexing it makes it so you no longer need to spend any effort trying to scrape off your minis.
Cons: -it uses an adhesive sheet from 3M which requires 3 days to fully adhere. Realistically this doesn't matter much unless for whatever reason you can't take 3 days off. The time you'll save yourself in the long run is super worth it though.
- you need to be careful which was the tab is facing. On the Mars pro 2 there is more room between the build plate and the resiviour on the back side of the printer, so you need to have the tabs facing towards the back or you can scratch the resiviour.
- I'm not sure if this is a printer issue or an issue with chitubox, but essentially the printer for whatever reason is set to go to the home location, and then move to Z zero, this essentially means when you're leveling the printer you want to use the sheet of paper hit home and tighten it and level it right there. Long story short if you try to raise the arm up a little and set that to z=0 to relieve some pressure on the spring it will fail to print. It tries to go to home first and will wind up slamming the print surface into the screen, be unable to actually get to home and the print won't start.
This isn't the products fault and is instead a problem with the printer software.
Basically you set the height that you want to be the base height and your printer for some reason says okay, we'll go to z=0 to start the print but first let me go to home which at this point is z=-5 or something. Slams the print surface into the base. The motor continues to try to reach z=-5 even when pressing into the screen and being unable to move. If left too long I imagine this will burn up the motors in the printer.

J
Joe H
Game Changer

So far the Wham Bam flex plate I bought for use in my Mars 2 Pro has been an absolute game changer. It's so much faster and safer than the standard build plate. Easier to clean too. Should I upgrade to a larger printer, I'll be ordering a matching Wham Bam at the same time.

A
Alexander Takajian
Best first purchase for and sla printer

If your new to sla printer or a veteran, getting a flexplate is easily the best upgrade for your printer. Prints easily, and I mean easily, comes off your build plate with a simple flex. Great job with this product.