135 x 80 (Short Tab) - Anycubic Photon Mono 4k and Photon Ultra
135 x 80 (Short Tab) - Anycubic Photon Mono 4k and Photon Ultra
135 x 80 (Short Tab) - Anycubic Photon Mono 4k and Photon Ultra
135 x 80 (Short Tab) - Anycubic Photon Mono 4k and Photon Ultra
135 x 80 (Short Tab) - Anycubic Photon Mono 4k and Photon Ultra
135 x 80 (Short Tab) - Anycubic Photon Mono 4k and Photon Ultra

135 x 80 (Short Tab) - Anycubic Photon Mono 4k and Photon Ultra

Regular price
$46.00
Sale price
$46.00
Quantity must be 1 or more

fits: Anycubic Photon Mono 4k and Anycubic Photon Ultra

Size: 135 x 80 mm with a shorter tab for a smaller vat

Continuous printing with a Double Wham, start another print before you start cleaning the first! The Double Wham contains:

  • 1  WB Magnetic Base with 3M adhesive resistant to harsh solvents and chemicals like resin, mean green, and isopropyl alcohol
  • 2  WB Flexi Build Plate (spring steel) with a custom etched texture on both sides
  • 1  Piece of Sandpaper

The Flexible Build System contains:

  • 1  WB Magnetic Base with 3M adhesive resistant to harsh solvents and chemicals like resin, mean green, and isopropyl alcohol
  • 1  WB Flexi Build Plate (spring steel) with a custom etched texture on both sides
  • 1  Piece of Sandpaper

For more information on this product, click here: Flexible Build System for Resin

*Attention: It is the buyer’s responsibility to be sure the size selected will work on your machine. Measure your bed, do not rely on build volume. Wham Bam is not responsible for mistaken order sizes

**It is the buyer’s responsibility to pay any taxes and import duties. No refunds of uncollected customs packages.

Customer Reviews

Based on 6 reviews
100%
(6)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
Joe M.
Anycubic Photon Mono 4k

Love my Wham Bam! Support team is super responsive with any questions I had and the double wham makes swapping plates for multiple builds a breeze. Fantastic build adherence and the prints pop right off. Was able to print some 2mm tokens flat and didn’t have to worry at all about them breaking. 10/10!

M
Mike
Great system!

I saw many reviews and YouTube channels using this system and I knew I needed to have it when I finally bought my first resin 3d printer a couple months ago. I watched the installation videos, found a file to help offset the height of the magnet on the build plate for my system, and applied the magnet to the build plate. Remember: wait a full 72 hours minimum for the glue on the magnet to fully adhere to the build plate. I have not had any issues since. Removing the flex plate and installing a new one to continue printing while I clean up what I printed is probably the best thing about having it installed. I have been nonstop printing ever since installing.

M
Manfred
Great addition to my Photon Ultra

Works like a charm and makes removing my prints a piece of cake.

R
Richard Kilgore
Best Upgrade for resin printers

I don’t even have time remove the build plate or use a special hanger to drain the residual. I just use a cookie pan with a silicone mat that I place under the printed object and remove the magnetic surface. Removing the objects from the flex plate itself is also super easy. Just had to bump the first layer time a little and also make sure the stock built surface is very flat before sticking the magnet to it. I honestly think this is the best upgrade for any resin printer. Please read the instructions first. There’s a spacer needed for the Z homing sensor and also some important instructions on how to install the plates.

C
Customer
Distance plate required?

Is it required to put a distance plate to the Z sensor for this printer like for others if I apply the wham bam mangetic plate or not in this case due to the printer design?

Customer Reviews

Based on 6 reviews
100%
(6)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
Joe M.
Anycubic Photon Mono 4k

Love my Wham Bam! Support team is super responsive with any questions I had and the double wham makes swapping plates for multiple builds a breeze. Fantastic build adherence and the prints pop right off. Was able to print some 2mm tokens flat and didn’t have to worry at all about them breaking. 10/10!

M
Mike
Great system!

I saw many reviews and YouTube channels using this system and I knew I needed to have it when I finally bought my first resin 3d printer a couple months ago. I watched the installation videos, found a file to help offset the height of the magnet on the build plate for my system, and applied the magnet to the build plate. Remember: wait a full 72 hours minimum for the glue on the magnet to fully adhere to the build plate. I have not had any issues since. Removing the flex plate and installing a new one to continue printing while I clean up what I printed is probably the best thing about having it installed. I have been nonstop printing ever since installing.

M
Manfred
Great addition to my Photon Ultra

Works like a charm and makes removing my prints a piece of cake.

R
Richard Kilgore
Best Upgrade for resin printers

I don’t even have time remove the build plate or use a special hanger to drain the residual. I just use a cookie pan with a silicone mat that I place under the printed object and remove the magnetic surface. Removing the objects from the flex plate itself is also super easy. Just had to bump the first layer time a little and also make sure the stock built surface is very flat before sticking the magnet to it. I honestly think this is the best upgrade for any resin printer. Please read the instructions first. There’s a spacer needed for the Z homing sensor and also some important instructions on how to install the plates.

C
Customer
Distance plate required?

Is it required to put a distance plate to the Z sensor for this printer like for others if I apply the wham bam mangetic plate or not in this case due to the printer design?