HotBox - 3D Printer Enclosure
HotBox - 3D Printer Enclosure
HotBox - 3D Printer Enclosure
HotBox - 3D Printer Enclosure
HotBox - 3D Printer Enclosure
HotBox - 3D Printer Enclosure
HotBox - 3D Printer Enclosure
HotBox - 3D Printer Enclosure
HotBox - 3D Printer Enclosure
HotBox - 3D Printer Enclosure
HotBox - 3D Printer Enclosure
HotBox - 3D Printer Enclosure
HotBox - 3D Printer Enclosure
HotBox - 3D Printer Enclosure
HotBox - 3D Printer Enclosure
HotBox - 3D Printer Enclosure
HotBox - 3D Printer Enclosure
HotBox - 3D Printer Enclosure
HotBox - 3D Printer Enclosure
HotBox - 3D Printer Enclosure
HotBox - 3D Printer Enclosure
HotBox - 3D Printer Enclosure
HotBox - 3D Printer Enclosure
HotBox - 3D Printer Enclosure

HotBox - 3D Printer Enclosure

Regular price
$119.00
Sale price
$119.00
Quantity must be 1 or more

If you want to print ABS, Nylon, PC, and other high-temperature filaments, an enclosure is one of the best upgrades for your machine. The Wham Bam HotBox is a lightweight, easy-to-assemble, and easy-to-fold-away solution! 

Designed to fit many small 3D printers with enough room for a desk-mounted spool holder or tool holder alongside your machine. The internal measurements are 568mm x 568mm x 484mm, 21.2" x 21.2" x 19" and has already been confirmed to fit:

  • Ender 3
  • Ender 3 Pro
  • Ender 3 S1 Pro (with printable parts)
  • Ender 2
  • Prusa MK2
  • Prusa MK3
  • Prusa MK3S
  • Prusa Mini
  • Biqu B1
  • Voxelab Aquila
  • Anycubic i3 Mega/Mega S
  • Geeetech A10
  • Snapmaker A150
  • Monoprice Maker Select V2
  • CR-10 mini (using printable foot extender)
  • CR-6 SE (if you remove the handle)
  • AnkerMake M5 (using desktop spool holder, see photo)

See the HotBox in action, check out our HotBox YouTube Playlist

The HotBox is made of high-grade Nylon 600D fabric with fire-resistant coating and lined with a metallic heat-deflecting internal liner that sandwiches around a strong, lightweight honeycomb insulating structure.

The front panel has a large clear window for maximum visibility and easily lifts up for full access to your printer. A velcro retaining strip is on top to keep the panel open while working.

The top panel has an access door for spool holder passage and for the vacuum tube, and a built-in thermometer (two LR44 batteries not included).

Features include:

  • Lightweight semi-rigid construction
  • Excellent insulating properties
  • 3 cable exits, one each on the left, right, and back panels
  • A large, transparent front window
  • Large opening for front access
  • Door for pass-through top-mounted spool holder
  • 9 metal lined filament passage holes, 5 on the back panel, 2 on the top panel including one for direct drive printers, and one each on the left and right panels
  • 9 plugs to fill filament holes when not in use
  • Built-in thermometer (two LR44 batteries not included)
  • Passage with cover for user-added aspiration and air filtering
  • Folds up flat, is easy to store and transport
  • 2 sets of loops to hold a LED light bar

 

Printable HotBox upgrades collection: https://whambamsystems.com/hotbox-support

We are also planning other HotBox accessories such as heaters and HEPA filter systems in the near future.

Product size: 580mm wide x 580mm deep x 490mm tall, 22.8” wide x 22.8” deep x 19.3” tall

Product weight: 3.1 kg, 6.8 lbs

Customer Reviews

Based on 19 reviews
84%
(16)
16%
(3)
0%
(0)
0%
(0)
0%
(0)
L
Lion
Maybe a small tweak..

I use the light bar in the Wham Bam Hotbox.
Since I use it this way, the straps hold it well, I do wish that it had a groove in the back for the strap to sit in. It is bright enough to only use 1 in the Hot Box.

L
Lion
Pretty Much Perfect

Works great, just as intended.
It sits on top on a Lack Table with the use of custom brackets. Because of this I lost 1" of height, so it rests on the top bar of my SV06. But that is my choice, not Wham Bam's. I think with today's printers that they should add another 3" to the height...but keep the other dimensions the same...JMO

J
Jacob Bechtel
Great Enclosure

The enclosure has been awesome! Easy to use and fits my prusa mini and filament holder

E
Eric
3D Printer Enclosure - Great Purchase!

After doing lots of research I found the Wham Bam 3D Printer Enclosure. Due to cold drafty air and kids playing near the printers, I needed a solution that would offer protection at a reasonable price. Wham Bam checked all the boxes. The set-up takes less than a minute and the quality is better than I expected. Very happy with my purchase - I have 2 of them for my Prusa printers. I recommend this as an alternative to the expensive Prusa enclosure.

S
S L
Wham Bam Enclosure

I am extremely happy with the Wham Bam enclosure, for my Prusa MK3S+. I have my 3d printer in my garage. The enclosure fits my printer perfectly, with the filament extension arm I printed. The enclosure helps to keep dust off the printer, and it also helps to maintain a controlled temperature inside the enclosure, for temperamental filaments, that require a more controlled environment. The enclosure is very well made, and allows access to areas of the printer, that may require maintenance.

Customer Reviews

Based on 19 reviews
84%
(16)
16%
(3)
0%
(0)
0%
(0)
0%
(0)
L
Lion
Maybe a small tweak..

I use the light bar in the Wham Bam Hotbox.
Since I use it this way, the straps hold it well, I do wish that it had a groove in the back for the strap to sit in. It is bright enough to only use 1 in the Hot Box.

L
Lion
Pretty Much Perfect

Works great, just as intended.
It sits on top on a Lack Table with the use of custom brackets. Because of this I lost 1" of height, so it rests on the top bar of my SV06. But that is my choice, not Wham Bam's. I think with today's printers that they should add another 3" to the height...but keep the other dimensions the same...JMO

J
Jacob Bechtel
Great Enclosure

The enclosure has been awesome! Easy to use and fits my prusa mini and filament holder

E
Eric
3D Printer Enclosure - Great Purchase!

After doing lots of research I found the Wham Bam 3D Printer Enclosure. Due to cold drafty air and kids playing near the printers, I needed a solution that would offer protection at a reasonable price. Wham Bam checked all the boxes. The set-up takes less than a minute and the quality is better than I expected. Very happy with my purchase - I have 2 of them for my Prusa printers. I recommend this as an alternative to the expensive Prusa enclosure.

S
S L
Wham Bam Enclosure

I am extremely happy with the Wham Bam enclosure, for my Prusa MK3S+. I have my 3d printer in my garage. The enclosure fits my printer perfectly, with the filament extension arm I printed. The enclosure helps to keep dust off the printer, and it also helps to maintain a controlled temperature inside the enclosure, for temperamental filaments, that require a more controlled environment. The enclosure is very well made, and allows access to areas of the printer, that may require maintenance.