Size: 258 x 258 mm / 10.15" x 10.15"
*Fits: Bambu Lab X1, X1C, and P1P
Since the BambuLab has a built-in magnetic bed, this is not a kit, only a Flexi Plate with a pre-installed PEX Build Surface. The QR is not needed to use our plate but we are including 5 QR stickers to add if desired.
- 1 Wham Bam Flexi Build Plate (spring steel) with pre-installed PEX Build Surface
- 5 QR stickers
****PETG has the tendency to bond to PEX, we highly suggest using a glue stick as a barrier when printing PETG on standard settings. For more on how to print PETG on the PEX build surface without glue, please read this guide thoroughly, adjust your slicer settings, and print this test cube in a corner to see if your PETG releases or bonds too well.
*Attention: It is the buyer’s responsibility to be sure the size selected will work on your machine. Measure your bed, do not rely on build volume and see if you are happy with the size before ordering. Please keep in mind that on one side you will have a tab that sticks out another 15mm. Wham Bam is not responsible for mistaken order sizes. Learn more about machine fits HERE.
**It is the buyer’s responsibility to pay any taxes and import duties. No refunds of uncollected customs packages.
Received the plate in great condition and immediately installed on my X1 Carbon. Printed a couple small items using overture PETG. Didn't notice any lifting so went for a bit bigger project and had some lifting. Completely my fault. Used glue stick after for PETG and have had nothing but great results since. Just need to avoid a couple spots on the bed now.
The PEX surface is amazing. Everything does down like butter and sticks like glue. When the plate cools, parts literally slide right off. I don't even have to pull. This is with PLA, ABS, and ASA, but I'm sure other types work just as well. Just be careful with PETG.
My only gripe is that they don't deburr the edges of the plate, so you can scratch up your magnetic pad pretty badly if you're not careful placing it down. Just run a file to clean up the edges and this thing is perfect and leaves a mirror finish on the parts. They do get a star taken off for that.
Love the glassy finish on bottom layers. Perfect bed adhesion every time. Can’t recommend it highly enough!
So I have had a Wam Bam pex plate on my CR10 for years and it still works great.. A game changer fo sho..
But adding this to the bambu lab x1c.. is next level. I didnt prep the surface at all. And it works like a dream.
I found it best to leave the playe to cool, then the part usually just falls off..
Get one, you will end up want two!
The original plate with the P1P isn’t bad but the Wham Bam plates always seem to hold onto prints better than the textured plates and the pop them right off
Received the plate in great condition and immediately installed on my X1 Carbon. Printed a couple small items using overture PETG. Didn't notice any lifting so went for a bit bigger project and had some lifting. Completely my fault. Used glue stick after for PETG and have had nothing but great results since. Just need to avoid a couple spots on the bed now.
The PEX surface is amazing. Everything does down like butter and sticks like glue. When the plate cools, parts literally slide right off. I don't even have to pull. This is with PLA, ABS, and ASA, but I'm sure other types work just as well. Just be careful with PETG.
My only gripe is that they don't deburr the edges of the plate, so you can scratch up your magnetic pad pretty badly if you're not careful placing it down. Just run a file to clean up the edges and this thing is perfect and leaves a mirror finish on the parts. They do get a star taken off for that.
Love the glassy finish on bottom layers. Perfect bed adhesion every time. Can’t recommend it highly enough!
So I have had a Wam Bam pex plate on my CR10 for years and it still works great.. A game changer fo sho..
But adding this to the bambu lab x1c.. is next level. I didnt prep the surface at all. And it works like a dream.
I found it best to leave the playe to cool, then the part usually just falls off..
Get one, you will end up want two!
The original plate with the P1P isn’t bad but the Wham Bam plates always seem to hold onto prints better than the textured plates and the pop them right off