160 x 130 Kit with Pre-Installed PEX Build Surface
160 x 130 Kit with Pre-Installed PEX Build Surface
160 x 130 Kit with Pre-Installed PEX Build Surface
160 x 130 Kit with Pre-Installed PEX Build Surface
160 x 130 Kit with Pre-Installed PEX Build Surface
160 x 130 Kit with Pre-Installed PEX Build Surface
160 x 130 Kit with Pre-Installed PEX Build Surface

160 x 130 Kit with Pre-Installed PEX Build Surface

Regular price
$36.00
Sale price
$36.00
Quantity must be 1 or more

Size: 160 x 130 mm / 6.3" x 5.1"

fits: Monoprice Select Mini V1 and V2

The Pre-Installed Flexible Build System includes:

  • 1  Wham Bam Flexi Magnetic Base (high temp-resistant up to 150 degrees with high temp 3M adhesive)
  • 1  Wham Bam Flexi Build Plate (spring steel) with pre-installed Wham Bam Custom Formulated PEX Build Surface
  • 1 Steel Wool 000 (for prepping your PEX Build Surface)

The Pre-Installed Double Wham includes:

  • 1  Wham Bam Flexi Magnetic Base (high temp-resistant up to 150 degrees with high temp 3M adhesive)
  • 2  Wham Bam Flexi Build Plate (spring steel) with pre-installed Wham Bam Custom Formulated PEX Build Surface
  • 1 Steel Wool 000 (for prepping your PEX Build Surface)

    For more information on this product, click here: Flexible Build System

    *Attention: It is the buyer’s responsibility to be sure the size selected will work on your machine. Measure your bed, do not rely on build volume and see if you are happy with the size before ordering. Please keep in mind that on one side you will have 2 tabs that stick out another 15mm. Wham Bam is not responsible for mistaken order sizes. Learn more about machine fits HERE.

    **It is the buyer’s responsibility to pay any taxes and import duties. No refunds of uncollected customs packages.

    Customer Reviews

    Based on 108 reviews
    93%
    (100)
    7%
    (8)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    B
    Bob
    Best build surface I’ve used

    I added the flexible build plate with PEX for my Ender farm and I’ll never use a different one. Models stick like glue and pop right off when done.

    J
    Justin Ellis
    Great

    Works phenomenally. Wish I hadn't jumped the gun on installing it before thinking about removing the old build plate and installing it directly on the heater bed. Didn't know/think that was an option until afterwards.

    D
    Dennis
    Works really well for me with some small caveats

    The plates are excellent surfaces to print on. I started with a small 180x180 Kingroon plate and when I saw the larger sizes were available I placed on order for them on the wham bam site. Some things to note:

    1) My build area on my Voron is 300x300 but the build plate is actually larger, so the 300x300 one on the site is too small and also has the corners cut off (like a round section) so I just went ahead and am using it as it is for now.

    2) I've already managed to scratch it with the nozzle while I fine-tune the z-offset automatic leveling script. It had some small issues and mis-calculated offsets caused the nozzle to contact the bed.

    3) I tried to use the supplied steel wool but I don't remember getting any instructions for the plates, so I just put the plate in the sink and ran warm water & soap on it while scrubbing the scuffed and scratched areas with the steel wool. This seemed to help a lot but now those areas are more opaque than the rest of the build plate.

    As I said, I like the surfaces and am using them exclusively now on my printers (from using glass before) but I'd like to know more about the purpose of the steel wool and how best to clean/repair the plates with it.

    C
    Chris Collins
    Troodon 400

    It works even though it does not fit the whole bed, Only if they made Flexi Plates for the Troodon 300 and 400. Good adhesion and performs well.

    L
    Lenders Benoit
    Perfect item for my Ender 3 v2

    Great delivery as annonced.
    Very clean product!
    Clean my previous PEX layer was the only one problem I had. The new PEX from my order was perfect and very easy to install.

    Customer Reviews

    Based on 108 reviews
    93%
    (100)
    7%
    (8)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    B
    Bob
    Best build surface I’ve used

    I added the flexible build plate with PEX for my Ender farm and I’ll never use a different one. Models stick like glue and pop right off when done.

    J
    Justin Ellis
    Great

    Works phenomenally. Wish I hadn't jumped the gun on installing it before thinking about removing the old build plate and installing it directly on the heater bed. Didn't know/think that was an option until afterwards.

    D
    Dennis
    Works really well for me with some small caveats

    The plates are excellent surfaces to print on. I started with a small 180x180 Kingroon plate and when I saw the larger sizes were available I placed on order for them on the wham bam site. Some things to note:

    1) My build area on my Voron is 300x300 but the build plate is actually larger, so the 300x300 one on the site is too small and also has the corners cut off (like a round section) so I just went ahead and am using it as it is for now.

    2) I've already managed to scratch it with the nozzle while I fine-tune the z-offset automatic leveling script. It had some small issues and mis-calculated offsets caused the nozzle to contact the bed.

    3) I tried to use the supplied steel wool but I don't remember getting any instructions for the plates, so I just put the plate in the sink and ran warm water & soap on it while scrubbing the scuffed and scratched areas with the steel wool. This seemed to help a lot but now those areas are more opaque than the rest of the build plate.

    As I said, I like the surfaces and am using them exclusively now on my printers (from using glass before) but I'd like to know more about the purpose of the steel wool and how best to clean/repair the plates with it.

    C
    Chris Collins
    Troodon 400

    It works even though it does not fit the whole bed, Only if they made Flexi Plates for the Troodon 300 and 400. Good adhesion and performs well.

    L
    Lenders Benoit
    Perfect item for my Ender 3 v2

    Great delivery as annonced.
    Very clean product!
    Clean my previous PEX layer was the only one problem I had. The new PEX from my order was perfect and very easy to install.