**This is a closeout item**
We have developed the Wham Bam PEX Build Surface from a specially formulated polymer with a higher melt point than PEI that attracts most any filament without damaging the sheet. Prints easily pop off once cooled and flexed. This thinner version of our PEX build surface is 0.19mm thick and pre-backed with 3M adhesive so it takes seconds to install.
Please note that some of our users find this thinner version of PEX (0.19mm) is not as suitable for PETG as our standard version (0.35mm), if using PETG we suggest using a glue stick as a barrier to avoid bonding and possible chipping during part removal.
View the full chart of filament settings on PEX
Here is an article on the differences, settings, tips, and maintenance for all our build surfaces.
*Please confirm bed size on your actual machine prior to ordering. Wham Bam is not responsible for mistaken sizes ordered. See our sizing guide.
*It is the buyer’s responsibility to pay any taxes and import duties. No refunds of uncollected customs packages.